Cigarette papers? Hard to find? Obviously, Bill, you don't frequent the head shops. :)
I agree that pipe stem cleaners aren't as ubiquitous as they used to be, but like most other hard-to-find items, they're easy to find on Amazon. Most cities have at least one cigar store for smoking enthusiasts, and I'd be surprised if they didn't carry them too. Personally, despite the undesirable cotton lint, I make do with cotton swabs.
I confess this article is the first mention I've heard of the problem of platen shells slipping around their cores. Given that all typewriters are now old typewriters, I would have expected to have encountered this if it were a common thing. It's hard to imagine how hammering a brad into a platen while it's still installed on the typewriter, as shown in the first illustration, could be done without permanently damaging the typewriter's adjustment.
I do not accept anonymous comments. I only allow comments under User IDs provided I know who that person is. Do not ask me to evaluate typewriters. Comments must be relevant to the post. As the author of these posts, I make the decisions about what they contain - it is not open to discussion.
Some good advice. I even had that copy and do not recall the article.
ReplyDeleteGood pipe step cleaners are getting difficult to find as are cigarette papers.
Cigarette papers? Hard to find? Obviously, Bill, you don't frequent the head shops. :)
ReplyDeleteI agree that pipe stem cleaners aren't as ubiquitous as they used to be, but like most other hard-to-find items, they're easy to find on Amazon. Most cities have at least one cigar store for smoking enthusiasts, and I'd be surprised if they didn't carry them too. Personally, despite the undesirable cotton lint, I make do with cotton swabs.
I confess this article is the first mention I've heard of the problem of platen shells slipping around their cores. Given that all typewriters are now old typewriters, I would have expected to have encountered this if it were a common thing. It's hard to imagine how hammering a brad into a platen while it's still installed on the typewriter, as shown in the first illustration, could be done without permanently damaging the typewriter's adjustment.